• Tube Fittings
• Needle Valves
• Manifold Valves
• Monoflange Valves
• Ball Valves
• Check Valves
• Pipe Fittings
• Pressure Gauge Accessories

Needle Valves Screwed
Bonnet Design (Male x Male) Manufacturers and suppliers in Indore

Model No. GV-55-NV

FEATURES
Maximum working pressure:
6000 psi (414bar) at 100°F (38°C)
10000 psi (690bar) at 100°F (38°C)
Working temperature:
-65°F (-54°C) to 464°F (240°C)
-65°F (-54°C) to 842°F (450°C)
PTFE packings can be adjusted to extend the valve life.
Stem threads are rolled and lubricated to prevent galling and reduce operating torque.
Optional sour gas service conforms to NACE Mr0175.
Hydro test performed with pure water at 1.5 times of working pressure.
100% factory test
Material : A479 304, A479 316, A182 GRF 316, Monel, Hastelloy, Inconel

Description

Part No.	Part Description	Material	Qty.
1	Body	SS 316	1
2	Gland Body	SS 316	1
3	Gland Retainer	SS 304	1
4	Check Nut	SS 316	1
5	Spindle	SS 316	1
6	Gland Packing	P.T.F.E	1
7	Gland Ring	SS 304	1
8	Gland Washer	SS 304	1
9	Trim	SS 316	1
10	Dust Cap	Rubber	1
11	Handle	SS 304	1
12	Grub Screw	SS	1
13	Lock Pin	SS 304	1

Note: 1. Packing is optional with graphite for high temperature to 450℃

6000 PSI

Model No.	Inlet x Outlet	A	B	C
GV-55-NV-4	1/4"NPT	55	25	89
GV-55-NV-6	3/8"NPT	55	25	89
GV-55-NV-8	1/2"NPT	70	28	90
GV-55-NV-12	3/4"NPT	75	36	110
GV-55-NV-16	1"NPT	90	45	113

Note: Also available in double bonnet design.

Note: All dimensions are subject to change without notice
All dimensions are in mm unless specified

10000 PSI

Model No.	Inlet x Outlet	A	B	C
GV-55-NVH-4	1/4"NPT	60	28	93
GV-55-NVH-6	3/8"NPT	60	28	93
GV-55-NVH-8	1/2"NPT	75	32	98
GV-55-NVH-12	3/4"NPT	85	45	115
GV-55-NVH-16	1"NPT	100	50	120

Note: All dimensions are subject to change without notice
All dimensions are in mm unless specified

GLOBAL Valves tube fittings deliver a leak-tight, gas-tight seal in an easy-to-install, disassemble, and reassemble form. The robust tube grip with patented, two-ferrule technology is resistant to vibration fatigue and withstands high pressures and temperature extremes

Tube Fittings has been designed for use in instrumentations, process & control system, analyses and environment employed in chemical, petroleum, power generating, pulp & paper plants. GLOBAL Valves tube fitting has also found special application in other fields where high-pressure tube fitting has also found special application in other fields where high-pressure tube fittings are required. If more specific information, including heat code traceability, is required GLOBAL Valves will provide details. Stainless steel Tubefit Engineers tube fitting work reliably on both seamless & welded - redrawn, fully, annealed type tubing.